AUD $250.00
- 4 in 1
- Electrical Conductivity (EC), TDS, Salinity & Temperature measurement device with consistency and high accuracy
- Measurement of Conductivity range
- Waste & sewage water (between 50 to 1500 µS/cm in common case)
- A built-in Automatic Temperature Compensation (ATC) function to eliminate the error of readings
- Self-calibration
- Top quality durable plastic with rated against splashed water
- 4 in 1 combined Electrical Conductivity (EC), TDS, Salinity & Temperature measurement device
- ±1% high accuracy tester
- Ideally for high conductivity liquid, i.e. waste water, salt water
- 1 to 3 points calibration for Conductivity; single point calibration for Temperature
- Temperature unit °C or °F switchable
- Automatic Temperature Compensation
- Manual or Automatic ‘Hold’ and ‘Power Off’ function
- Durable ABS plastic housing with IP54 rating
- Replaceable electrode (optional item)
For for research, hydroponics & other relevant industries
Model : TCS-40T
Conductivity
Range Resolution
0 ~ 20.00 µS/cm 0.01
0 ~ 200.0 µS/cm 0.1
0 ~ 2000 µS/cm 1
0 ~ 20.00 mS/cm 0.01
Accuracy: ±1% F.S.
Calibration Points: 1 to 3 Points
TDS
Range: 0 ~ 10 ppt (Max. 20 ppt upon factor setting
Accuracy: ±1% F.S.
TDS Factor: 0.1 ~ 1.0 (Default 0.5)
Salinity
Range: 0 ~ 10 ppt
Accuracy: ±1% F.S.
Resolution: 0.01 ppt
Temperature
Range: 0 ~ 60°C (32 ~ 140°F)
Accuracy: ± 1°C
Resolution: 0.1°C (0.1°F)
Calibration Points: 1 Point
Calibration Range: Measured value ± 10°C
Temperature Compensation: 0 ~ 60°C (32 ~ 140°F)
Temperature Coefficient: 2% / °C
Cell Constant: K = 1
Normalization Temperature: 25°C
Hold Function: Manual or Automatic
Power Off: Manual or Automatic (8 minutes after inactivity)
Operating conditions: 0 ~ 60°C
Non-Volatile Memory: Yes
Power supply: 2 x 1.5V AAA batteries
Dimension(L*W*H): 40(Diameter) x 185(Length) in mm
Weight: Approx. 100g
- 1 x Pocket Style EC TDS Salinity Temperature Tester
- 1 x Approx. 60ml 12.88 mS/cm Calibration Buffer
- 1 x Approx. 60ml 84 µS/cm Calibration Buffer
- 1 x Approx. 60ml 1413 µS/cm Calibration Buffer
- 1 x Carry Case
- 2 x 1.5V AAA Batteries
- 1 x Instruction Manual
- 1 x Standard Factory Packing
